2010 Screen Set problems


Results 1 to 2 of 2

Thread: 2010 Screen Set problems

  1. #1
    Registered
    Join Date
    Oct 2008
    Location
    USA
    Posts
    9
    Downloads
    0
    Uploads
    0

    Default 2010 Screen Set problems

    Just started setting up the 2010 Screen Set and strange things are happening.

    When I click the Start Cycle button the spindle moves to the Park Position and stops. I click the Start Cycle button again and the spindle moves to the Tool Change position and the Z moves down for Z-Zero after it Zeros it moves to the cut position and begins the cut.
    Any help would be appreciated.
    Thanks
    Bill I

    Similar Threads:


  2. #2
    Member ger21's Avatar
    Join Date
    Mar 2003
    Location
    Shelby Township
    Posts
    35538
    Downloads
    1
    Uploads
    0

    Default Re: 2010 Screen Set problems

    I would try re-installing Mach3, preferably a clean install? I can't see any way that any of what you're describing should be able to occur, and I've never heard of this before.

    Cycle Start should never move to the Park position unless your g-code start with an M883 code.

    Gerry

    UCCNC 2017 Screenset
    [URL]http://www.thecncwoodworker.com/2017.html[/URL]

    Mach3 2010 Screenset
    [URL]http://www.thecncwoodworker.com/2010.html[/URL]

    JointCAM - CNC Dovetails & Box Joints
    [URL]http://www.g-forcecnc.com/jointcam.html[/URL]

    (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

2010 Screen Set problems

2010 Screen Set problems