Did you copy the macros from \Mach3\macros\2010 into \Mach3\macros\yourprofilename\
Hi,
I installed the 2010 while following the video on YT, I have everything set up in Mach3 but once I chose the"view" 2010 screen, none of the controls work, no y /x z access movement at all, when I switch back to the Mach3 screen, everything works. I am not sure what I missed or why things aren`t working, but if anyone can guide me I`d appreciate it...
Thanks R.
Similar Threads:
Did you copy the macros from \Mach3\macros\2010 into \Mach3\macros\yourprofilename\
Gerry
UCCNC 2017 Screenset
[URL]http://www.thecncwoodworker.com/2017.html[/URL]
Mach3 2010 Screenset
[URL]http://www.thecncwoodworker.com/2010.html[/URL]
JointCAM - CNC Dovetails & Box Joints
[URL]http://www.g-forcecnc.com/jointcam.html[/URL]
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
Hi Ger,Yes I did.
Problem solved, all set now.