Go to View > Load Screens, choose the 1024.set screen and calibrate from there.
When your finished, use View > Load Screens and switch back to the 2010 screenset.
There's no Calibrate in the 2010 Screenset.
HI folks
I have been using 2010 screen set for many years now, but just recently had to replace the dell running mach3. I have everything up and running again. Not i can't find the dialog box to calibrate the axis. You know the one that asks "which axis to calibrate" , "how far to move", and "how far did it really move"
Maybe just getting old and over looking something. I would appreciate any help.
Thanks
Similar Threads:
Go to View > Load Screens, choose the 1024.set screen and calibrate from there.
When your finished, use View > Load Screens and switch back to the 2010 screenset.
There's no Calibrate in the 2010 Screenset.
Gerry
UCCNC 2017 Screenset
[URL]http://www.thecncwoodworker.com/2017.html[/URL]
Mach3 2010 Screenset
[URL]http://www.thecncwoodworker.com/2010.html[/URL]
JointCAM - CNC Dovetails & Box Joints
[URL]http://www.g-forcecnc.com/jointcam.html[/URL]
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
Thanks for the quick reply Gerry!!!