Post for Mastercam x7 mill.


Results 1 to 2 of 2

Thread: Post for Mastercam x7 mill.

  1. #1
    Member
    Join Date
    Dec 2005
    Location
    United States
    Posts
    210
    Downloads
    0
    Uploads
    0

    Default Post for Mastercam x7 mill.

    I looked around and could not find anything. I just upgraded to x7 Mastercam. I found a post online for Mach3 on Mastercam. But the post makes the machine move back to 0,0,0 after spindle turns off every time. I either need a different post or figure out how to modify this post. I opened it on notepad and it says at the start:

    # Additionally, this Post homeS the tool to 0,0,0 Note this Post raiseS Z an absolute distance of 0" above the work surface.
    # This returns the tool to the reference point in Mach3.

    I read thru most of the post and it understand some of it but a lot of it is weird. Any ideas?

    Thanks Eric,

    Similar Threads:


  2. #2
    Registered
    Join Date
    Dec 2015
    Location
    U.S.A
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default Re: Post for Mastercam x7 mill.

    Can you post the Post Processor in question. I Have posts for 6 machines here at work so If you send me the file I will take a look.



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Post for Mastercam x7 mill.

Post for Mastercam x7 mill.