Newbie Rhinocam post processor for Busellato Jet 4002


Results 1 to 2 of 2

Thread: Rhinocam post processor for Busellato Jet 4002

  1. #1
    Registered
    Join Date
    May 2017
    Location
    Italy
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default Rhinocam post processor for Busellato Jet 4002

    Hello, anybody knows if a post processor for Busellato Jet 4XXX from Rhinocam exists anywhere?
    Among the many available for Rhinocam there is none...althought I experimented and it seems that some of the available ones get close to the desired result, none of them is accepted by the Genesis software.
    Also, there is a way in Rhinocam to split the G-code since Genesis has a limitation at about 1500 lines.
    Any help appreciated, thank you very much!

    Similar Threads:


  2. #2
    Member awerby's Avatar
    Join Date
    Apr 2004
    Posts
    5728
    Downloads
    0
    Uploads
    0

    Default Re: Rhinocam post processor for Busellato Jet 4002

    Assuming you've got a legal copy of RhinoCAM, Mecsoft will configure a post for your machine for free; that's part of their excellent tech support service. You'll need to supply them with a sample of code that works on your machine, and they will get it to work with RhinoCAM.

    [FONT=Verdana]Andrew Werby[/FONT]
    [URL="http://www.computersculpture.com/"]Website[/URL]


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Rhinocam post processor for Busellato Jet 4002

Rhinocam post processor for Busellato Jet 4002