4axis rhinocam parallel finishing act weird


Results 1 to 6 of 6

Thread: 4axis rhinocam parallel finishing act weird

  1. #1
    Registered
    Join Date
    Apr 2017
    Location
    Greece
    Posts
    2
    Downloads
    0
    Uploads
    0

    Default 4axis rhinocam parallel finishing act weird

    hi
    first picture shows how item must be,second picture shows the item after horizondal routing simulate and t third picture shows the problem, that the simulation cut off the object at the
    end to several pieces,something that sould not do.Any ideas why is that happening?
    I have make simulare item with out any problem,
    Any help would be greatful!
    Thanks


    Similar Threads:
    Attached Thumbnails Attached Thumbnails 4axis rhinocam parallel finishing act weird-1-jpg   4axis rhinocam parallel finishing act weird-2-jpg   4axis rhinocam parallel finishing act weird-3-jpg  
    Last edited by alextech; 04-11-2017 at 01:40 PM.


  2. #2
    Registered
    Join Date
    Apr 2017
    Location
    Greece
    Posts
    2
    Downloads
    0
    Uploads
    0

    Default Re: 4axis rhinocam parallel finishing act weird

    Please guys.
    Nobody have any simirar problem?
    Or knoing something about it?



  3. #3
    Member awerby's Avatar
    Join Date
    Apr 2004
    Posts
    5728
    Downloads
    0
    Uploads
    0

    Default Re: 4axis rhinocam parallel finishing act weird

    Have you asked Mecsoft's tech support about this issue? One really nice thing about RhinoCAM is that it comes with free telephone tech support. The technician can share your screen, show you where you went wrong, and how to fix it. You're in a different time zone, but it might be worthwhile to stay up late some night and call in during business hours in the Pacific Standard Time zone.

    [FONT=Verdana]Andrew Werby[/FONT]
    [URL="http://www.computersculpture.com/"]Website[/URL]


  4. #4
    Member
    Join Date
    Mar 2010
    Location
    Russia
    Posts
    95
    Downloads
    0
    Uploads
    0

    Default Re: 4axis rhinocam parallel finishing act weird

    How is toolpath looking? What tool do you using for finishing?
    I not sure it helps, but you may try:
    Go to Tools-Options
    In Document Properties go to Mesh and change Jagger&Faster to Smooth& Slower
    Recalculate TP
    Rerun Simulation



  5. #5
    Registered
    Join Date
    May 2010
    Location
    US
    Posts
    11
    Downloads
    0
    Uploads
    0

    Default Re: 4axis rhinocam parallel finishing act weird

    It would help if you posted the 3DM file.

    fcc



  6. #6
    Member routalot's Avatar
    Join Date
    Dec 2003
    Posts
    1206
    Downloads
    0
    Uploads
    0

    Default Re: 4axis rhinocam parallel finishing act weird

    Are all the normals the correct way round?



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

4axis rhinocam parallel finishing act weird

4axis rhinocam parallel finishing act weird