Setting 4-axis right work for rhino


Results 1 to 2 of 2

Thread: Setting 4-axis right work for rhino

  1. #1
    Registered
    Join Date
    Aug 2016
    Location
    Ukraine
    Posts
    3
    Downloads
    0
    Uploads
    0

    Default Setting 4-axis right work for rhino

    I use rhinocam for 4-axis processing.

    But I have problem with 4 axis parallel finishing. Problem that after first move form along axis Y, A coordinate is 0 grad. It rapidly moves on nominal speed to 357 grad. Throught my part. Today such mode cutted my part and I want to know, what can I do. I use linux CNC and I haven't adjusted move from 0 to 360 grad in minus. I need it work normally without such thing.

    G01 X0.0000 Y22.0000 Z117.0000 A0.000 F3000.Z111.0000 A0.000
    Y29.5000 A0.000 F1500.
    Y113.2500 A0.000
    Y118.2500 A0.000
    Y132.0000 A0.000
    Y135.1250 A0.000
    Y147.0000 A0.000
    Y154.5000 A0.000
    Y159.5000 A0.000
    Y270.0000 A0.000 <- hear starts a problem
    Y164.3750 A357.931 F5000. <- rapid move throught all part
    Y155.0000 A357.931
    Y137.5000 A357.931
    Y133.7500 A357.931

    In 4th axis parallel finishing > Cut pattern is setted: Along axis, Zigzag and Low to High. I use mach3 postprocessor.

    Similar Threads:


  2. #2
    Registered
    Join Date
    Aug 2016
    Location
    Ukraine
    Posts
    3
    Downloads
    0
    Uploads
    0

    Default Re: Setting 4-axis right work for rhino

    After a year after this post, I must say that problem was not solved. I suppose that it could be in postprocesosor. But I don't need it anymore.



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Setting 4-axis right work for rhino

Setting 4-axis right work for rhino