- Need Help!- Thread milling / Tool setup and proper end mill
-
Member
Thread milling / Tool setup and proper end mill
I want to give thread milling a try from within Rhinocam for some Alum. parts I am designing.
I have been looking at some help and tutorial but I am a little unclear on feeds/speed as well as RPM.
I am also unsure if this tool will allow me to do what I want to do:
I am essentially looking to make M8 x1.25 threaded holes.
M8x1 25 Carbide Thread Mill Brand New TiAlN Coated | eBay
1.25mm PITCH SOLID CARBIDE THREAD MILL
USE TO CUT A M8x1.25 OR LARGER THREAD
3 HELICAL FLUTES
.235" CUTTING DIAMETER
13 PITCH LENGTH OF CUT (.640")
2.5" OVERALL LENGTH
TiALN COATED
1/4" SHANK DIAMETER
POLISHED SHANK
Similar Threads:
-
- Need Help!- Thread milling / Tool setup and proper end mill
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules