Need Help with Rhino Cam


Results 1 to 3 of 3

Thread: Need Help with Rhino Cam

  1. #1


  2. #2
    Member
    Join Date
    Oct 2005
    Location
    usa
    Posts
    169
    Downloads
    0
    Uploads
    0

    Default Re: Need Help with Rhino Cam

    If you use a predefined region you can change the start point and direction
    Need Help with Rhino Cam-change-start-jpg

    I have also found Rhinocam by default seems to choose the start point and direction based on the order the entities were created.

    If you type "DIR" in the Rhino command line, You can change the direction of the entity.



  3. #3
    Member
    Join Date
    Mar 2010
    Location
    Russia
    Posts
    95
    Downloads
    0
    Uploads
    0

    Default Re: Need Help with Rhino Cam

    Also you can use Rhino CrvSeam command to move start point.
    Was:
    Need Help with Rhino Cam-1-jpg
    now:
    Need Help with Rhino Cam-2-jpg



Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Need Help with Rhino Cam

Need Help with Rhino Cam