Results 1 to 4 of 4

Thread: rhinocam post processor for mach3 for 5axis

  1. #1
    Registered
    Join Date
    May 2012
    Location
    usa
    Posts
    2
    Downloads
    0
    Uploads
    0

    Default rhinocam post processor for mach3 for 5axis

    Is there anyone that has rhinocam 2.0 post processor for mach3 for 5 axis
    Thank you for reply

    Similar Threads:


  2. #2

    Default

    Send a support email and they'll make you exactly what you want.

    Hey check out my website...www.cravenoriginal.com
    Thanks Marc


  3. #3
    Registered
    Join Date
    Nov 2009
    Location
    Palestine
    Posts
    27
    Downloads
    0
    Uploads
    0

    Default

    You have to post your g-code to maxnc machine ,
    mach 3 will read it will with no problems .



  4. #4
    Gold Member
    Join Date
    Apr 2004
    Location
    Oakland CA USA
    Posts
    2218
    Downloads
    0
    Uploads
    0

    Default

    Sorry, you don't get the 5-axis program when you pay for the 3-axis version, but if you did pay for it, it should have been included in what you got. List prices on RhinoCAM (and VisualMill) are $1,250 for the base version (3-axis), $2,500 for the base version plus the 4th axis module, $5,000 for the Pro Version (4 axes plus lots of advanced machining strategies) and $10,000 for the Premium version with simultaneous 5th axis toolpathing. (Note: These prices don't include Maintenance, which is optional but recommended). We can do a little better on these prices, but we can't make them go away altogether...

    Andrew Werby
    ComputerSculpture.com — Home Page for Discount Hardware & Software



Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum from DIY CNC Machines to the Cad/Cam software to run them. The site is 100% free to join and use, so join today!

Follow us on

Facebook Dribbble RSS Feed