RhinoCAM & DSP RZNC0501


Results 1 to 12 of 12

Thread: RhinoCAM & DSP RZNC0501

  1. #1
    Registered
    Join Date
    Mar 2008
    Location
    USA
    Posts
    16
    Downloads
    0
    Uploads
    0

    Default RhinoCAM & DSP RZNC0501

    Has anyone used RhinoCAM with the DSP Controller RZNC0501?

    I have been using Vectric and selected G code MM. *tap file but in RhinoCAM I need the correct post processor and can't seem find the right one.

    Anyone have any suggestions??

    Thanks

    Similar Threads:


  2. #2
    Prototyper pointcloud's Avatar
    Join Date
    Sep 2006
    Location
    USA
    Posts
    340
    Downloads
    0
    Uploads
    0

    Default

    Email mecsoft support they'll make it happen

    Hey check out my website...www.cravenoriginal.com
    Thanks Marc


  3. #3
    Member
    Join Date
    Jan 2011
    Location
    USA
    Posts
    171
    Downloads
    0
    Uploads
    0

    Default

    Sos
    I am doing exactly the same thing right now with a new router. Trying to get the right post processor for my dsp. Did you figure it out or did they have to make you one?



  4. #4
    Registered shapebuster's Avatar
    Join Date
    Mar 2014
    Location
    Lisboa
    Posts
    10
    Downloads
    0
    Uploads
    0

    Default Re: RhinoCAM & DSP RZNC0501

    Does anyone have this post processor? I really need it...
    Regards



  5. #5
    Member
    Join Date
    Mar 2010
    Location
    Russia
    Posts
    95
    Downloads
    0
    Uploads
    0

    Default Re: RhinoCAM & DSP RZNC0501

    What exact you need from this PP?
    I using RhinoCAM with 0501 for years, it's a lot standart pp, working fine with 0501.
    For example you can use mach2 or mach 3 pp - works fine.
    I made few minor fixes for my comfort, you can try this one http://dfiles.ru/files/p1aaleg3j



  6. #6
    Registered shapebuster's Avatar
    Join Date
    Mar 2014
    Location
    Lisboa
    Posts
    10
    Downloads
    0
    Uploads
    0

    Default Re: RhinoCAM & DSP RZNC0501

    Quote Originally Posted by Melkiades View Post
    What exact you need from this PP?
    I using RhinoCAM with 0501 for years, it's a lot standart pp, working fine with 0501.
    For example you can use mach2 or mach 3 pp - works fine.
    I made few minor fixes for my comfort, you can try this one http://dfiles.ru/files/p1aaleg3j
    Thank you very much Melkiades,
    I didn't have any clue in what Rhinocam Post Processor i should use with my machine. I recently purchased this machine https://plus.google.com/photos/10173...Je7qNzO6rTMzQE, i have been making some minor fixings and i need to cut some big wood 3d parts, i have in Rhino.
    I am going to try it out this week. Any advice?
    Best regards from Portugal.



  7. #7
    Member
    Join Date
    Mar 2010
    Location
    Russia
    Posts
    95
    Downloads
    0
    Uploads
    0

    Default Re: RhinoCAM & DSP RZNC0501

    Quote Originally Posted by shapebusters View Post
    I am going to try it out this week. Any advice?
    Best regards from Portugal.
    Just put spm file in Rhinoceros 5\Plug-ins\RhinoCAM\Posts\ folder
    And choose QuickCNC machine from list.

    Also google for DSP manual - it's good help for newbies. Sorry, i have only russian manual here.



  8. #8
    Member
    Join Date
    Mar 2010
    Location
    Russia
    Posts
    95
    Downloads
    0
    Uploads
    0

    Default Re: RhinoCAM & DSP RZNC0501

    Sorry, Shapebusters, i gave you wrong PP.
    This one have problem reading arc process operations like G02/G03
    Here is right one:
    http://dfiles.ru/files/alqhg26w9
    Please replace old file.
    Take a note, it's produce F codes. Good for change motion speed in process, for example for slow approach and engage.
    If you don't want it, turn it off in unit:
    MENU->ADVANCED PRO SETUP->G-CODE READING SETUP->aim to Read F code by X- button, than turn it off by Y- button, than press OK
    I add useful notes in file header in this PP. You can read it by any text viewer, e.g. notepad.



  9. #9
    Member delid's Avatar
    Join Date
    Mar 2019
    Posts
    18
    Downloads
    0
    Uploads
    0

    Default Re: RhinoCAM & DSP RZNC0501

    i am using haas PP with rhinocam (i am newly using it) and it works on 2 axis milling with my dsp controlled machine. today i tried holes>drill with selecting points from rhino, the simulation was fine but cnc acted weird. it moved to first point and origin than 2nd point and origin and goes on.

    would it be fixed if i use another PP, lets say PP for Mach3? or is there a custom PP like Melkiades's one, file is deleted from link btw, i couldn't dl it.

    thanks in adv



  10. #10
    Member
    Join Date
    Mar 2010
    Location
    Russia
    Posts
    95
    Downloads
    0
    Uploads
    0

    Default Re: RhinoCAM & DSP RZNC0501

    My PP not working correct with drilling cycles.
    At my 0501 drill bit not rise after cycle, move to another drilling point, and breaking tool.
    Be careful with this.



  11. #11
    Member delid's Avatar
    Join Date
    Mar 2019
    Posts
    18
    Downloads
    0
    Uploads
    0

    Default Re: RhinoCAM & DSP RZNC0501

    i tried with HitachiSeiki PP and it worked ok. i haven't tried on material tho, watched it drilling air but was looking alright.



  12. #12
    Member Mecsoft-Sales's Avatar
    Join Date
    Aug 2018
    Posts
    8
    Downloads
    0
    Uploads
    0

    Default Re: RhinoCAM & DSP RZNC0501

    Can you please provide a sample g-code output from your machine?
    Looking forward to hearing from you.

    Quelly del Mundo
    sales@mecsoft.com

    For MecSoft Support: support@mecsoft.com



Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

RhinoCAM & DSP RZNC0501

RhinoCAM & DSP RZNC0501