Give angle of exit or demoulding


Results 1 to 2 of 2

Thread: Give angle of exit or demoulding

  1. #1
    Member
    Join Date
    Feb 2012
    Location
    Peru
    Posts
    87
    Downloads
    0
    Uploads
    0

    Default Give angle of exit or demoulding

    Hello all, I want to give angle of departure of 14 degrees to the letters, I want to know how you can do? thanks you

    Similar Threads:


  2. #2
    Member routalot's Avatar
    Join Date
    Dec 2003
    Posts
    1206
    Downloads
    0
    Uploads
    0

    Default Re: Give angle of exit or demoulding

    Are you intending to produce individual letters or cut letters into an object?The process is fairly similar in that you select the outline of the letters and use the extrude curve-draft feature to create the surfaces or solids you require and you will be prompted for the draft angle,which in your case will be 14 degrees.The depth will be positive or negative according to your needs as mentioned earlier.



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Give angle of exit or demoulding

Give angle of exit or demoulding