LinkBack URL
About LinkBacks
Ok guys heres some info. These are 2 rollers, one has a left knurl and one has a right knurl. They are approximately 4.150 in diameter and 8 inches long and have pockets milled in the faces as well. The tough part is that the tolerances on these have to be very tight. Any taper along the faces would make them unusable. I have some information from the original manufacturer that I can share on how they were made. They are made from stressproof steel. I need one set to start and if everything works it should there will be more to follow. You can leave a PM or email me at unlimited1320@aol.com
Thanks
