RFQ: Aluminum parts

[aaextra666]

Parts B and C are simple, part A is a bit more complex.
All parts are Aluminum 6061; I have some material of appropriate thickness, but it needs to be cut down to width. I can provide material if necessary.
Please let me know how soon you can deliver the parts.
My requirements:
2 units of part A
2 units part B
2 units part C
I will provide sldprt and dxf when necessary.

Please let me know if you need any more information. Thank you and I look forward to hearing from you all!
-AJ

[abcmojave]

What are your desired tolerances? Surface finish?

[annoying]

It would appear there was an error on part A as it states 3/4" thick and 9.525mm. Should be 3/8" correct?

[aaextra666]

It would appear there was an error on part A as it states 3/4" thick and 9.525mm. Should be 3/8" correct?

You are correct, sorry about that. Part A should be 3/8" thick.

Also, I don't have a specific surface finish in mind. Aside from the 2 through holes in Part A which must be drilled to 2mm diameter, tolerance is negotiable, but I'd aim for +-3%.

[mike1993]

Pm Sent. Thanks

[aaextra666]

All,
Thank you for your quotes. I have accepted an offer.
-AJ