delrin block

[chuck_hobby]

Hello all,
So I've been a machining hobbyist for a long time, with the inevitable bleed into my regular work life. I've got a part I made a prototype of for work, now I'm in need of a set of 4 and wanted to have them made properly.

Acetal would be my first-choice material, the part was designed to be milled from a 2-in thick block. Attached is a PDF, I've got a solidworks model available and could certainly make up a more informative drawing as well. Black or natural...slight preference for black but either way is fine.

Anyway, I would need 4 of these and have some other work that is similar which would be coming along eventually also.
Thoughts? Bids? I'm in Seattle WA and would need them delivered to zip coide 98109. Thanks!
Chuck

[scadvice]

Hello all,
So I've been a machining hobbyist for a long time, with the inevitable bleed into my regular work life. I've got a part I made a prototype of for work, now I'm in need of a set of 4 and wanted to have them made properly.

Acetal would be my first-choice material, the part was designed to be milled from a 2-in thick block. Attached is a PDF, I've got a solidworks model available and could certainly make up a more informative drawing as well. Black or natural...slight preference for black but either way is fine.

Anyway, I would need 4 of these and have some other work that is similar which would be coming along eventually also.
Thoughts? Bids? I'm in Seattle WA and would need them delivered to zip coide 98109. Thanks!
Chuck

Chuck, thanks for the opportunity to quote these parts:

PM sent...

[mike1993]

PM sent. Thanks

[chuck_hobby]

All,
PM's sent, job has been let. Thanks everybody. More later, need to finalize this one first. Much appreciated to everyone who responded or PM'd.
Chuck