RFQ small aluminium rail QTH 30

[alphatroniqu]

Hi

i have aluminium Rail to CNC machine ,ok i really bad machinist and lack of time

Material was 6061-T6 or similar

this need <1mm end mill for make the 2 grove
the 8.7mm surface need to be as flat/scare as possible (+/-0.01mm)
rail was 30cm long

end use ..
a pair of rail +spacer will hold a 0.8mm think paper tape into the 1mm notch

Best regard

[shen]

quantity 30？means 15 pairs?

[alphatroniqu]

Hi yes 15 pair but each part of the pair was the same part

also 30 was the initial order it will probably more order later

Best regard
Marc Lalonde
Alphatronique inc.

[shen]

Hi yes 15 pair but each part of the pair was the same part

also 30 was the initial order it will probably more order later

Best regard
Marc Lalonde
Alphatronique inc.

hi,what kind surface treatment you need?

[shen]

Hi yes 15 pair but each part of the pair was the same part

also 30 was the initial order it will probably more order later

Best regard
Marc Lalonde
Alphatronique inc.

Without surface treatment,$22 each, FOB Suzhou,will send to you via DHL,the shipping charge not included.
Thanks
Best Regards!
Shen.Ji
C-Hi-Tech Inc.China

[alphatroniqu]

Hi

i look for some one in north america

Best regard

[shen]

Hi

i look for some one in north america

Best regard

okey, sorry for that
regards!
shen

[snovak240]

Hello I am interested and am in the US. Can you tell me what time line you are looking for on these and is there someone making them for you now. You can e mail me or P/M me any time thans Stan

[alphatroniqu]

Hi all

original 30 QTH have been assigned to a forum user today

my current price not let me any room for profit margin

so if some one was able to made the new rail in the attachments
file for under 12$ each in 30 QTH please let me knot

thank for all that have reply and Quote to this RFQ

Best regard
M.lalonde

[artin5]

Hi Marc,
We are a cnc shop located in Montreal. We specialize in small to medium lot machining. You can give us a call for the next job if you're interested.

thx
Artin
Mechart
Mechart | Bonjour | Hello

[alphatroniqu]

Hi all

this update\status of my job

i feel that i put 600$ in the garbage
part have >0.1" difference in length
dimension not respected need height of 0.476" shipped part have 0.416"
hole for tread rod need ~0.095" shipped part have 0.250"
whit .250 hole a 0.260 spacer was totally use less
spacer was a joke not deburred at all and out of tolerence

so i chose send that job to a professional machinist and i end up whit
a worst job that i may make myself on my tail mill/lathe

i will not tell name of that guy only that i not have yet posted on that topic
i got it Qoute in pm ...

Best regard
Marc Lalonde
Alphatronique inc.

[Matt@RFR]

Marc, go ahead and post the name of the person who did that! People like that need to be called out in public. That is unforgivable and disgusting. Kinda makes me wish it wasn't illegal to smack someone around just because they deserve it. That person should at LEAST be banned from using the commerce area of this website.

I'm too busy to take this job on right now, but I'm sure someone else will have the time. Please don't let one idiot ruin your view on machine shops.

Are those part-off tits on the spacers??? Pathetic.

EDIT: This is why having 2D prints is so important. A lot of people think they are a waist of time / money, but if you had a print, you could reject the parts for not meeting the print and demand your money back. I doubt a person of that caliber would actually refund your money, but it's worth a try anyway.