7075 bar stock turned and center drilled

[advert]

I need a pretty simple part made. as follows

I need 7075 turned down to 1.144
I need it to be 6.9 long
I need it to be center drilled 27/64

thats it.

shipped to surprise az 85374


Thanks

Similar Threads:

• Need A Quote- RFQ - ti and 7075 alum cnc turned parts w/2nd mill/drill ops
• Hex Bar Stock turned and drilled/tapped
• RFQ - Turned Steel w/ Drilled & Tapped Set Screws (Cancelled)
• RFQ 34 - Small manual job - Offset turned and cross drilled hardened locking pin
• RFQ - small mild steel turned and drilled parts

[advert]

to clarify, I need the hole drilled in the center the entire length. I pretty much need a tube made out of round bar.

[npolanosky]

Quote sent.
Thanks!

[advert]

Got it, thanks to all the sent me a msg.

will need something very similar again soon.