Wood Routing Job Quote Please

[ammo_ginger]

I have a tomahawk stand design file created in Vectric Aspire V-Carve Pro, I can output the tool paths to almost any machine or setup including Mach 3 operated CNC routers.

The job requires .75in thick hardwood, either red oak or basswood. It is roughly 14" wide x 20" tall. I can spit up the two pieces of the design to accommodate narrower planks of hardwood, so the minimum widths will be 10" but heights will still need to be 20". I am located in New Mexico not far from Lubbock TX (USA).

Can anyone run this file for me and provide a quote for tooling, machine time materials and shipping please plus turn around time (my machine is down and I'm in a pinch). Thanks!

Similar Threads:

• I need some routing done. Quote please!
• RFQ CNC Wood Routing
• Dynatorch used for wood routing too???
• wood routing
• 3d wood routing...

[ammo_ginger]

I have a tomahawk stand design file created in Vectric Aspire V-Carve Pro, I can output the tool paths to almost any machine or setup including Mach 3 operated CNC routers.

The job requires .75in thick hardwood, either red oak or basswood. It is roughly 14" wide x 20" tall. I can spit up the two pieces of the design to accommodate narrower planks of hardwood, so the minimum widths will be 10" but heights will still need to be 20". I am located in New Mexico not far from Lubbock TX (USA).

Can anyone run this file for me and provide a quote for tooling, machine time materials and shipping please plus turn around time (my machine is down and I'm in a pinch). Thanks!

Anybody? Bump

[mojo145]

Hey, That looks like a cool project. I have a machine built from Joe's Evo plans and run Mach 3. I would love to make this for you! What bits are needed for your toolpaths? I've got most standard bits but it looks like the chamfer uses a 60 degree bit. My timeline would be by Thursday this week if I don't need to order any bits or by saturday or sunday if I do. Let me know if you still need this made and I can figure out a quote.