Need Help! Enco Zx7045 leads screw nut

Results 1 to 4 of 4

Thread: Enco Zx7045 leads screw nut

  1. #1
    Registered
    Join Date
    Apr 2017
    Location
    United States
    Posts
    3
    Downloads
    0
    Uploads
    0

    Default Enco Zx7045 leads screw nut

    Hi everybody, I am new to the site but this place looks like an awesome resource. I am hoping someone can help me out. I recently bought an enco rf45 clone that has a completely stripped x-axis leadscrew nut. I was hoping that I could make one, but it looks like it is going to be much more difficult and/or expensive than I had hoped. My plan was to make a tap from a piece of acme threaded rod...however I cannot find the correct size anywhere. It appears to be an 24mm trapezoidal thread but it has a 10 tpi pitch. I am now reaching out to you folks here to see if anyone has an old leadscrew nut hanging around that they have no need for now that their machine has been converted to ballscrews... I would just convert this machine to ballscrews but I don't have another mil and I'd really like to get this up and running. If anyone with an rf45 clone feels like looking around in their junk boxes for that old leadscrew nut, then please let me know! Thanks!

    Similar Threads:


  2. #2
    Registered
    Join Date
    Apr 2017
    Location
    United States
    Posts
    3
    Downloads
    0
    Uploads
    0

    Default Re: Enco Zx7045 leads screw nut

    Also, could anyone confirm that my measurements are correct for the stock leadscrews for this machine? (24mm trapezoidal or acme, and 10 tpi). Thanks again.



  3. #3
    Member arizonavideo's Avatar
    Join Date
    May 2008
    Location
    USA
    Posts
    1185
    Downloads
    0
    Uploads
    0

    Default Re: Enco Zx7045 leads screw nut

    I should have one or two

    Send me a email at davedaxx1@yahoo.com

    youtube videos of the G0704 under the name arizonavideo99


  4. #4
    Registered
    Join Date
    Apr 2017
    Location
    United States
    Posts
    3
    Downloads
    0
    Uploads
    0

    Default

    Quote Originally Posted by arizonavideo View Post
    I should have one or two

    Send me a email at davedaxx1@yahoo.com
    The part arrived the other day, I can't wait to get this mill up and running now!

    Arizonavideo, you are the man!



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Enco Zx7045 leads screw nut

Enco Zx7045 leads screw nut