Despite not having doors on yet, or finished with a coolant pump system, I had the urge to cut out something random with the mill. Glad I did because it shows I still have some slop to take care of in the ways or ballscrew ( oval and oversized holes, jumpy tool path) I suppose I'll try to tighten up the gibbs more and see where that goes. Any other suggestions are welcome.
Also, I tried using the haimer 3d sensor to set up my stock origin in mach 4, but everytime i started the program it didn't switch between Z heights on the tool table so it was cutting air with the first tool. I have no idea what I'm missing with that.
Sent from my VS985 4G using Tapatalk