Blowing Fuses?


Results 1 to 2 of 2

Thread: Blowing Fuses?

  1. #1
    Registered
    Join Date
    Nov 2013
    Posts
    12
    Downloads
    0
    Uploads
    0

    Default Blowing Fuses?

    I have a couple of the X900 machines and both of them have been blowing fuses.

    The first unit melted an e-stop switch and then started to blow fuses to the point the machine wont do more than power up and blow a fuse.

    Our second machine seems to have melted the main power switch and is also blowing fuses.

    Any pointers would be great!

    Similar Threads:


  2. #2
    Registered
    Join Date
    Jul 2014
    Posts
    26
    Downloads
    0
    Uploads
    0

    Default Re: Blowing Fuses?

    Tim, what do you have plugged into the convenience outlets in the back of the machine. These will only handle low amps. Melting the power switch, the power cord fuse, etc have all happened due to trying to run fans, coolers, etc from those outlets. I recommend that you don't use them at all.



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Blowing Fuses?
Blowing Fuses?