Brand New RECI 100watt but very limited spark


Results 1 to 4 of 4

Thread: Brand New RECI 100watt but very limited spark

  1. #1
    Registered
    Join Date
    Dec 2014
    Location
    Australia
    Posts
    154
    Downloads
    0
    Uploads
    0

    Default Brand New RECI 100watt but very limited spark

    Just replaced my old RECI 100w Tube with a New one, while replacing and checking the Mirror alignment, I noticed I couldn't see any Burn Mark when pressing Pulse. I placed Tape over the first Mirror next to the Laser Tube and fired ( Pulse ) the tube but at a distance of 5cm away from this Mirror there was very little burn marks on the Masking Tape. Seems that the Laser isn't firing the whole 100watt as normally there would be a Hole through the Tape not just a light burn mark. Anyone have a reason for this lack of power from a New Tube?

    Similar Threads:


  2. #2
    Registered
    Join Date
    Dec 2014
    Location
    Australia
    Posts
    154
    Downloads
    0
    Uploads
    0

    Default Re: Brand New RECI 100watt but very limited spark

    Also I have tried to press START on a previously cut file but nothing happens



  3. #3
    Registered lasertube's Avatar
    Join Date
    Nov 2013
    Location
    Montreal
    Posts
    164
    Downloads
    0
    Uploads
    0
    Items for Sale

    Default

    If everything was conected correctly , there is no burnning mark at the first mirror or a little bit of mark. You have to see if there is any power for your new laser tube.
    New producing laser tube is easy to have problem, since it was just tested after storing short time. If some laser tube is not sealed very well, the laser tube leaks gas gradually. The laser tube power will be decreased gradually. People could not found this problem even they test it before sending out.

    Peak Glass Inc
    lyxiong@peakofglass.com
    anna@peakofglass.com
    laser tubes & Power supply
    www.peakofglass.com



  4. #4
    Registered
    Join Date
    Dec 2014
    Location
    Australia
    Posts
    154
    Downloads
    0
    Uploads
    0

    Default Re: Brand New RECI 100watt but very limited spark

    Thanks Lasertube, it was the Power Supply so I had to order a new one.



  5. #5
    Registered
    Join Date
    May 2016
    Location
    New Zealand
    Posts
    23
    Downloads
    0
    Uploads
    0

    Default Re: Brand New RECI 100watt but very limited spark

    Quote Originally Posted by KenR60 View Post
    Thanks Lasertube, it was the Power Supply so I had to order a new one.
    Hi Ken

    Ohh no, now this, you haven't been so lucky with your laser venture



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Brand New RECI 100watt but very limited spark
Brand New RECI 100watt but very limited spark