Need Help! REDSAIL M500


Results 1 to 2 of 2

Thread: REDSAIL M500

  1. #1
    Registered
    Join Date
    Jun 2016
    Location
    Greece
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default REDSAIL M500

    I have 2 problems with redsail m500.Suddenly it is not firing.I change the laser tube but it is not firing again.The second problem is that i can not set the work table and the laser going to another point.Thank you...Please help me

    Similar Threads:


  2. #2
    Registered
    Join Date
    May 2016
    Location
    New Zealand
    Posts
    23
    Downloads
    0
    Uploads
    0

    Default Re: REDSAIL M500

    Hi there
    If you just have changed tie tube and it is still not working, then it sound like the Power supply.

    About the work table and the laser going to another point, it sound like you are talking about the red dot pointer. It will normally only work for one focal distance, if you are changing the height of the work table the red dot will be out and you have to set it again.
    A Laser combiner can solve that problem.

    Hope it all makes sense?



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

REDSAIL M500
REDSAIL M500