Just purchased a Redsail Laser used, but never used.....can't jog X or Y axis.


Results 1 to 2 of 2

Thread: Just purchased a Redsail Laser used, but never used.....can't jog X or Y axis.

  1. #1
    Registered
    Join Date
    May 2013
    Location
    Canada
    Posts
    23
    Downloads
    0
    Uploads
    0

    Default Just purchased a Redsail Laser used, but never used.....can't jog X or Y axis.

    Hi there,

    Looking for some advise. We bought a new, used Laser and can not get it running. We have another Chinese Laser which I use as a reference to startup and operating. The Redsail does not Reset to factory mechanical home on power up. I also can not jog the X or Y axis with the arrows on the front control pad. I have a friend with electronics background helping me out but so far, we are both stumped. Any ideas?

    Cheers,
    Jeff

    Similar Threads:


  2. #2
    Registered
    Join Date
    May 2013
    Location
    Canada
    Posts
    23
    Downloads
    0
    Uploads
    0

    Default Re: Just purchased a Redsail Laser used, but never used.....can't jog X or Y axis.

    Still looking for some help or suggestions on this. Anything would be appreciated.
    Cheers



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Just purchased a Redsail Laser used, but never used.....can't jog X or Y axis.

Just purchased a Redsail Laser used, but never used.....can't jog X or Y axis.