Memory usb for MPC6515


Results 1 to 3 of 3

Thread: Memory usb for MPC6515

  1. #1
    Registered
    Join Date
    Feb 2005
    Location
    España
    Posts
    175
    Downloads
    1
    Uploads
    0

    Default Memory usb for MPC6515

    Hello, if someone without a computer one on MPC6515 please can you tell me which usb memory used? brand and capacity?.
    I tried Verbatin, TDK and Freecom 4GB not work. I formatted in fat32 and fat16
    Kingston 8 and 16 Gb and neither
    Leetro have are very expensive
    regards
    Roque7

    Similar Threads:


  2. #2
    Registered
    Join Date
    Feb 2005
    Location
    España
    Posts
    175
    Downloads
    1
    Uploads
    0

    Default

    Fixed, usb flash disk found old unknown brand, and formatted to fat16 works with the MPC6515.
    Regards
    Roque7



  3. #3
    Registered EXLASer's Avatar
    Join Date
    Nov 2009
    Location
    China
    Posts
    314
    Downloads
    0
    Uploads
    0

    Default

    See this passage too late for more than a month ~
    We manufacture ordered a special U-stick which will packing with dongle for a present to customer .
    It's memory should not too big as the panel can not recognize .It is only have 512 M ,but it is enough for store the laser mol files .
    Format :FAT32

    Best regards,
    Mary Lee
    XYZ Machinery



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Memory usb for MPC6515

Memory usb for MPC6515