Results 1 to 5 of 5

Thread: steppers...

  1. #1
    Registered
    Join Date
    Dec 2006
    Location
    Canada
    Posts
    45
    Downloads
    0
    Uploads
    0

    steppers...

    does anyone know a place to get cheap stepper motors with lots of torque? im building a robot with 4 x 12" wheelbarrell wheels. i want to use skid steering and direct drive for each wheel to keep things simple. it is going to carry 2 12V x 8.5Ah batteries for drive, and one for lights and other electronics.


  2. #2
    Registered
    Join Date
    Jun 2006
    Location
    usa
    Posts
    217
    Downloads
    0
    Uploads
    0
    why do you want steppers?


  3. #3
    Registered
    Join Date
    May 2005
    Location
    USA
    Posts
    9
    Downloads
    0
    Uploads
    0
    Best bet is try EBAY


  4. #4
    Registered
    Join Date
    Dec 2006
    Location
    Canada
    Posts
    45
    Downloads
    0
    Uploads
    0
    ok.. i have actually given up on this one for a bit... working on another robot now...


  • #5
    Registered
    Join Date
    Feb 2007
    Location
    usa
    Posts
    498
    Downloads
    0
    Uploads
    0
    i have 24 volt dc servo motors very small and compact with alot of torgue,they have 65:1 ratio gear heads on them,could sell them cheap like $14 each plus shipping,i have plenty of them


  • Similar Threads

    1. Are these steppers ok?
      By ghettoblaster in forum Mechanical Calculations/Engineering Design
      Replies: 3
      Last Post: 09-25-2006, 01:03 PM
    2. Two steppers on one 201???
      By Greolt in forum Gecko Drives
      Replies: 2
      Last Post: 06-13-2006, 07:37 AM
    3. Are all steppers DC?
      By DennisCNC in forum Stepper Motors and Drives
      Replies: 1
      Last Post: 06-09-2006, 09:28 PM
    4. Help, what are these steppers?
      By ljogwin in forum Stepper Motors and Drives
      Replies: 1
      Last Post: 05-08-2006, 11:35 PM
    5. 3 Steppers?
      By drakesis in forum Stepper Motors and Drives
      Replies: 4
      Last Post: 06-14-2005, 01:40 PM

    Posting Permissions


     


    About CNCzone.com

      We are the largest and most active discussion forum from DIY CNC Machines to the Cad/Cam software to run them. The site is 100% free to join and use, so join today!

    Follow us on

    Facebook Dribbble RSS Feed


    Search Engine Friendly URLs by vBSEO ©2011, Crawlability, Inc.