Any Fanuc Karel people here?

[BobM3]

I'm trying to figure out how to send files throught the RS232 port of my Fanuc robot. I'm haing trouble with the OPEN and WRITE commands. Anyone here done any Karel programming?

[lennoncs]

Originally Posted by BobM3 I'm trying to figure out how to send files throught the RS232 port of my Fanuc robot. I'm haing trouble with the OPEN and WRITE commands. Anyone here done any Karel programming?

What controller?
RF, RH,RJ..

what software version?


Sean

[axbalin]

Hello

You may be able to adivice,,,, i also havea fanuc robot arm

I have the task of modifying a welding (arc mate) robot in to a painting robot (my paint is water based so don’t worry). Anyway I am wondering for starters wich robot is better for my application the 100i or the 120i and with what controller, the gun that is going to be used will not weight more than 20 lb.

Can some one please advice, I will really appreciate it, I also need information on how to choose the valves I will be using to work with the gun etc.
Does anyone know if this has already been done somewhere?


Thanks again!

[lennoncs]

Originally Posted by axbalin Hello (my paint is water based so don’t worry). Thanks again!

Paintshop robots spraying waterborne are still Class/Div rated for good reason.

NOT advised.

Sean

[megaman26]

Hi I need the help for can programming a robot Fanuc S-420F with control RH the version Karel is 2.2... Idont know how program, Can I help me? mi email is guille.ramirez@hotmail.com