ABB S3 controller

Results 1 to 4 of 4

Thread: ABB S3 controller

  1. #1
    Registered
    Join Date
    Sep 2006
    Location
    China
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default ABB S3 controller

    I have a ABB old robot IRB6000 with S3 controller.
    Now I want to setup connection from PC to S3 controller's serial port, using
    Hyperterminal.
    Does anyone has this experience and can help me?

    Similar Threads:


  2. #2
    Registered
    Join Date
    Jun 2010
    Location
    Denmark
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default

    I know that I am reopening a really really old thread, but how about using a controller like like this http://www.emx.net.au/super4usbrelay.htm to simulate pressing the buttons on the S3 controller. I do not have any experience with this so it is just a wild guess. I have seen other posts about similar things, and this could solve their issues as well.



  3. #3
    Member
    Join Date
    Jan 2010
    Location
    Argentina
    Posts
    8
    Downloads
    0
    Uploads
    0

    Thumbs up ABB S3 flppy drive update

    Hi ABB fans, here a new gadget for your ABB S3 Robots.
    FlexiDriveMV-SD - Floppy Drive Update to SD card.
    This is a direct replacement for the floppy drive unit.
    You remove the actual 3.5” floppy drive, connect the FlexiDrive and that’s all.
    You will not use floppy disks any more.
    You will use a standard SD memory card. You can storage up 2500 floppies in a single SD card.
    Also for all ABB from S4 to S4c+, old KUKA's, Kawasaki's, FANUC's, or any industrial machine!

    FlexiDriveMV – Robot ABB S3



  4. #4
    Member
    Join Date
    Jan 2010
    Location
    Argentina
    Posts
    8
    Downloads
    0
    Uploads
    0

    Default Re: ABB S3 controller

    Replace your floppy drive on your your ABB S3 Robots now!

    FlexiDriveMV-SD - Floppy Drive Update to SD card.

    This is a direct replacement for the floppy drive unit.
    You remove the actual 3.5” floppy drive, connect the FlexiDrive and that’s all.
    You will not use floppy disks any more.
    You will use a standard SD memory card. You can storage up 2500 floppies in a single SD card.
    Also for all ABB from S4 to S4c+, old KUKA's, Kawasaki's, FANUC's, or any industrial machine!

    Robots ABB S3 Floppy Drive | FlexiDrive - Floppy Drive Emulator

    Now powered by WiFi SD Card !!
    FlexiDriveMV – Robot ABB S3



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

ABB S3 controller

ABB S3 controller