Need Help! Viper xz 30x24 build question


Results 1 to 6 of 6

Thread: Viper xz 30x24 build question

  1. #1
    Registered
    Join Date
    Dec 2011
    Location
    usa
    Posts
    6
    Downloads
    0
    Uploads
    0

    Default Viper xz 30x24 build question

    It's been over a year and I'm now just getting a chance to open my box's of parts. I am very impressed with not only the packing but how massive this little viper is. I have three other machines (larger) from another company I plan to replace with xzero machines. It took me about 2 hours to get it together (see picture)
    Now my question, I have two pieces of angle that are drilled and slotted (see picture) I'm thinking it for the table top. I did get the t-slot table, not installed yet. Can anyone help me identify these parts?

    Viper xz 30x24 build question-viper-xz-2-jpg Viper xz 30x24 build question-viper-xz-1-jpg

    Similar Threads:


  2. #2
    Member
    Join Date
    May 2014
    Posts
    21
    Downloads
    0
    Uploads
    0

    Default Re: Viper xz 30x24 build question

    Scott
    If you go to Georges web site there is a photo under table top section. Link Table top installation
    they bolt to the side of the 80 x 80 rail then the t top attaches to the angle.

    I have demon and the machine it self if Immpressive. the Only mistake I made was making to small but you have to start some where

    Kirk



  3. #3
    Registered
    Join Date
    Dec 2011
    Location
    usa
    Posts
    6
    Downloads
    0
    Uploads
    0

    Default Re: Viper xz 30x24 build question

    Thanks Kirk, Thank you for the link. I purchased the Viper to perform one small operation (a 2" slot in MDF). After getting this one I'm ready to order a larger one.

    Scott



  4. #4
    Member gio666's Avatar
    Join Date
    May 2008
    Location
    Canada
    Posts
    4068
    Downloads
    0
    Uploads
    0

    Default Re: Viper xz 30x24 build question

    Yes those are to mount table top , if you slot smaller row of holes. The table top can slide on and off

    Viper xz 30x24 build question-1-jpg Viper xz 30x24 build question-2-1-jpg

    XZero cnc


  5. #5
    Registered
    Join Date
    Dec 2011
    Location
    usa
    Posts
    6
    Downloads
    0
    Uploads
    0

    Default Re: Viper xz 30x24 build question

    Thanks George....



  6. #6
    Member gio666's Avatar
    Join Date
    May 2008
    Location
    Canada
    Posts
    4068
    Downloads
    0
    Uploads
    0

    Default Re: Viper xz 30x24 build question

    The Viper machines you can also drill the top and attach to 8080 profiles. but Raptor machine mounting to profiles does not work out all the time.

    XZero cnc


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Viper xz 30x24 build question

Viper xz 30x24 build question