Hurry..
I want more...
So, I'm going to start this build thread to document it, but also to get help as I need it.. I don't think I have all the parts yet, so I guess we'll start there!
Here's what I have so far. I've emailed George to find out what's missing. There was never a complete list of what I should be getting, so I'm not 100% sure what to expect that's not here. I don't seem to have a screw for the Z axis, at the lease, but it looks like the chains for organizing the wires and such are missing too. There might be some other misc. pieces/parts missing as well, but I've received about 3 or 4 various larger shipments and 1 or 2 small ones.
Thanks in advance for everyone's input and assistance!
Similar Threads:
Hurry..
I want more...
Any pics of the final assembly?
I understand the braces in the middle have to be ordered. 1x3 or 1030 and the Mounts are 6 hole button head M6-12 threaded.
24 Long 1x3 592mm
36 Long 1x3 892mm
48 Long 1x3 1192mm
60 Long 1x3 1492mm
The only missing answer for me is if the attached bracket will work or not. It is from Tnutz.com. The extrusion is available in any custom length from 8020inc on eBay.
ATTACH=CONFIG]269746[/ATTACH]
I hope that bracket works, it's the same one I ordered ;-)
Thanks for the brackets suggestions! Worked great! Just need to figure out the easiest method for attaching the slotted aluminum panels and my build it complete and ready for testing. The 2'x2" angled aluminum is going to be quite a bit of work to get right since it will all have to attach from the bottom. I am thinking of just countersinking screws from the top to t-nuts in the 8080 profile. The Weatherpack connectors worked great as well!
XZero cnc