Rams training cd wanted

[darde]

Does anyone have the Rams training cd's for 3d and the fourth axis for Rams Gold that they might part with.

[rossrods]

I have been trying to get rams support for 3 weeks now, I think they no longer exisit. I really hope I am wrong with that assumption. But anyways while I have you maybe you can help me with some simple questions. In rams gold when setting up your tool paths and your giving a tool discreption I know what ho is, I know what oa is, but what does co stand for any idea? Also when your generating your cams drawing and after setting all the information into the area where labeled "machine" the part where you start to describe the tool your using can you do multiple cams. Say for example ,you want to mill with a 1/4 ball nose mill and after that g-code runs, can you run another g-code under the same cam section to change out to lets say a 1/8" ball nose mill to get a better finish. Wish I could help with the cd's, I spoke to Dan about 3 weeks ago, that was on thursday and I told him I would place a order with him on the following monday, I have tried now for at least 3 weeks to get him but no response. He never mentioned anything about no longer staying in business, Hope his health is ok. Ricky

[RAMSSupport]

RAMS Support can be reached by e-mail support@rams3D.com Dan is fine, he is out of the U.S. right now and should be returning sometime this week. Dan hasn't done support for RAMS software for sometime. All support issues should be sent to the e-mail above.

Jack. RAMS Support.

[mp.ramaswame]

rams training cd wanted

[Joe Crumley]

Yep, This is a real problem for Rams users. That's the very reason I dumped the program. Well, not only that their phone support cesed to exist and their On-line support was slow.