Results 1 to 4 of 4

Thread: Pulsespacer calibration hanging

  1. #1
    Registered
    Join Date
    Jan 2007
    Location
    Canada
    Posts
    35
    Downloads
    0
    Uploads
    0

    Pulsespacer calibration hanging

    I've emailing back and forth with the designer of Quickstep4 regarding my issue.

    As soon as I try to Set the pulsespacer rate through the setup table my pc hangs. I tried installing from a USB drive, CD, C:, etc with no luck.

    I re-installed XP on a new Hard drive thinking that I may have some bad sectors with no luck.

    I'm looking for some fresh ideas as to what my problem would be. Specs are 700mhz, 20gb hd with 14gb available, and 512mb of ram.

    Thoughts??


  2. #2
    Registered
    Join Date
    Jan 2007
    Location
    Canada
    Posts
    35
    Downloads
    0
    Uploads
    0
    Should also add that I have no problems with the software from Quickstep. It will run fine on my other machines but as my luck will have it, the machine it fails to run on, is the one I need.


  3. #3
    Registered
    Join Date
    Jan 2007
    Location
    Canada
    Posts
    35
    Downloads
    0
    Uploads
    0
    Got it all figured out a few weeks ago. There was some sort of a hardware glitch with my printer port that I have yet to figure out.

    I will say that I am extremely pleased with Craig's software and his support. This program is extremely easy to learn and run!


  4. #4
    Registered
    Join Date
    Dec 2006
    Location
    USA
    Posts
    204
    Downloads
    0
    Uploads
    0

    What do I do to get Quick-step running?

    I am having a problem getting this software to run. When it comes to a G-code
    that is the same as the first line it will pause and my computer will lock up.
    I have went over thing that I know to look for and just don't know what to do.

    Any help would be welcome.
    Dan


Similar Threads

  1. Y axis stalling/hanging up
    By tdnp in forum DIY CNC Router Table Machines
    Replies: 7
    Last Post: 12-15-2007, 03:13 PM
  2. Old School Calibration
    By kenbarra in forum Calibration and Measurement
    Replies: 4
    Last Post: 04-30-2007, 08:16 AM
  3. Help! Calibration Creep
    By johnlew in forum Mach Mill
    Replies: 9
    Last Post: 01-16-2007, 02:23 PM
  4. Calibration sheet
    By brtlatjgt in forum General Metal Working Machines
    Replies: 1
    Last Post: 09-25-2006, 12:04 PM
  5. 1.5" Dia High Speed hanging 6"
    By Machine1 in forum Hard and High Speed Machining
    Replies: 5
    Last Post: 05-25-2004, 03:43 AM

Posting Permissions


 


About CNCzone.com

    We are the largest and most active discussion forum from DIY CNC Machines to the Cad/Cam software to run them. The site is 100% free to join and use, so join today!

Follow us on

Facebook Dribbble RSS Feed


Search Engine Friendly URLs by vBSEO ©2011, Crawlability, Inc.