Post processor - Pro Engineer to heidenhain 155

[UKRobotics]

Title says it all really. I would be really greatful if someone could point me in the right direction of a download for a Pro/E to Heidenhain 155 post processor.


Thanks.

[JonasC]

hej,

If you have a valid maintenance agreement with PTC you can download alot of postprocessors from their website. I think I recall there are a few that would suite your needs.
They can be found here:
http://www.ptc.com/cs/cs_22/howto/ncgp4903/ncgp4903.htm
http://www.ptc.com/cs/cs_26/howto/ncgp2646/ncgp2646.htm


If you dont have maintenance, you can always pm me.

/J

[agressoru]

Hello JonasC!

I saw your post about ProEngineer postprocessors and i said what a hack, i want to try, maybe u can help me.
U said there that u can download a lot of postprocessors from PTC site.
Can you please help me with MillplusIT postprocessor for Decke Maho machine (DMG DMU80T) ? 5 axis rotary table - C, rotary head - B.

email address : evi@ciumegu.com

Thank you very much,
i appreaciate your kindness

[RRT]

What kind of machine tool ?
Bridgeport Mill?

[agressoru]

so, now i have acces there but is no MILLPLUS IT postprocessor for 5 axis machines.
Deckel Maho DMU80T - command : heidenahain Millplus IT.
cya

[petronije2002]

If you need post proc. for HEIDENHAIN TNC 155, for PRO/E MANUF., I could send you.

[peter_s]

Originally Posted by petronije2002 If you need post proc. for HEIDENHAIN TNC 155, for PRO/E MANUF., I could send you.

hi, can you help me with proe pp for Heidenhain TNC 124 (?). the machine, and the controller

[moovi]

Hi everyone !
I need Pro/engineer (for 2001 verison or later, if it has some meaning ) postprocessor for Heidenhain TNC355(and/or tnc155) (machine : Mikron WF 6C).

moovi.work@gmail.com

THX!

[moghul]

hi all
i also need tnc155 postprocesor for pro e2001. if any one have please send me.
ishall be thankful to u.
shabbir moghul
moghul40@yahoo.com

[Pedja]

Originally Posted by peter_s hi, can you help me with proe pp for Heidenhain TNC 124 (?). the machine, and the controller

I need help to! :-) I need a postprocessor for HEIDENHAIN TNC 155! Would you be so kind to send it to me at this e-mail: pedjaca@gmail.com

[eduardo326]

hi everybody am new to your community, and just want to say hello

eduardo

[rasto199]

I need a postprocessor for HEIDENHAIN TNC 155 for ProE! Would you be so kind to send it to me at this e-mail: rasto199@gmail.com