| |
| Home Page | Mark Forums Read | Today's Posts | My Replies | Classifieds | Reviews | Photo Gallery | Web Links | Share Files | Advertise With Us | Ad List |
| |||||||
| PTC Pro/Manufacture Discuss PTC Pro/Manufacture software here. |
| | |
| This forum is sponsored by: |
 |
| | LinkBack | Thread Tools | Search this Thread | Display Modes |
|
#1
 
03-02-2007, 07:16 PM
| |||
| |||
 Wildfire 2.0 backmilling problem I've got a problem with backmilling in Wildfire 2.0. I've been using Pro/NC for about a year now, and this problem has me stumped. I need go through a hole in two plates to machine a counterbore; the counterbore is not accessible from the front side (see pics). I've been trying to do this with trajectory milling, but I can't get the cutter to "slice" back towards the machine tool (+Z). It's been suggested to me that I use volume milling, but no luck with it either. Anyone have any success with backmilling in WF 2.0? yar_seliva    |
|
| | |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
| Display Modes | |
| |
Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Need Heidenhain Tnc145 Post For Pro/e Wildfire | ARIF AHMED | Post Processor Files | 0 | 10-16-2006 11:48 PM |
| Post to Haas from wildfire | protogregg | Post Processor Files | 4 | 06-02-2006 08:57 AM |
| Heidenhain 5-axis post processor for Pro/E wildfire 2 | alphacentauri | General Metalwork Discussion | 0 | 05-18-2006 10:43 PM |
| PTC Wildfire (Thanks Mace) | Alan T. | PTC Pro/Manufacture | 16 | 02-04-2006 01:28 AM |
| Pro/E wildfire 300 bones | nervis1 | General CAM Discussion | 0 | 06-24-2005 12:28 AM |
| | |
Linear Mode
