ProE post processor for heindenhain TNC 410

[moldd]

Hi everyone,
I need an integrated pp into Proe Wildfire 4 for TNC 410, 3 axes.

I have tried the pp for Heidenhain from the PTC site but it was useless.

I have a pp that is not integrated into proe.
The bad thing about it is that it is time consuming when you are dealing with many NC sequences and it processes points only, not arcs. I can send if anyone needs this pp.

Any help would be more then welcome.

[Tuppela]

Hello I have a Post for you I think.
Do you have access the PTC downloading page for postprocessors, then I it would be greate to get a post for SIemens 840D in return.

[Dejanm88]

Hi guys, I have the same problem and also i need the same processor. I would thankfull if you help me or exchange for another...