- Need Help!- post processor - simple question
-
Registered
post processor - simple question
hellooo!!
i am trying to create a post processor using the pro/manufacture for a 5axis milling machine.
the machine has 2 rotary axis, B(-5/+110) and C(-360/+360).
in the option file generator, in tab ''secondary rotary table'' there is a choice for ''nutator angle'' (where, If the secondary rotary axis rotates in an inclined plane (nutator), specify the positive angle of this plane measured from X to Z or Y to Z in a counter clockwise direction)
the secondary rotery axis for my case is B (rotation about y axis).
i think the nutator angle for my machine is 0.
Am i right???
i am trying to understand what is the ''nutator angle''!!
please help me!!!
Similar Threads:
-
-
Registered
hi,
i hope that you already found the answer but i will post anyway
the nutator angle is the angle that live head tool can make it, you will find this info also in gpost help instructions
-
Registered
Hi,
Nutator angle only applies to the non-orthogonal head. to understand this concept in a better way see the head mechanism of DMU60P.
I am sure this will work you 100%, otherwise let me know.
-
Registered
hi Shoail,
I've tried to respond you but it seems that you have exceeded stored private messages
so I can naot send you pm.
Best regard.
-
Registered
- Need Help!- post processor - simple question
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules