introduction of HM-135

[Nemo1985]

HM-135 is made with high accuracy and high rotational speed spindle and chuck guard switch with auto power off.It always has a very special sale since its birth.There is a picture below.

[cheetahcnc]

What are the specs on this? Weight, X,Y,Z travel. Leadscrews/rolled or ground ballscrews? Spindle power?

Jim

[Nemo1985]

What are the specs on this? Weight, X,Y,Z travel. Leadscrews/rolled or ground ballscrews? Spindle power?

Jim

Thanks very much for your inquiries!Here is the specification:
Length: 30.70''
Width:31.49''
Height:35.43''
Machine weight:180kg
Shipping weight:230kg
Shipping dimensions:39.37''/40.94'/40.94''
Drilling capacity:0.98''
End milling capacity:0.98''
Table size:17.71*16.30''
Table travel x axis:11.81''
Table travel y axis:5.9''
Head travel z axis:11.41''
T-slot size7/16''
Slot on table,qty. :3

Spindle :
Motor power:1.33hz/1000w
The tape of spindle:MT-3 R-8
Min. speed:200rpm
Max. Speed:3500rpm
Spindle of taper:MT-2
Positioning accuracy:0.0004''
For more inf please visit our web:http://www.atron.com.tw

[cheetahcnc]

Does the spindle have a threaded drawbar to lock the toolholders into the MT-2 taper?

Jim

[Nemo1985]

Does the spindle have a threaded drawbar to lock the toolholders into the MT-2 taper?

Jim

Of course,it's necessary for machine running.