If you you using Vision engraving software and thinking of upgrading to Windows 7 this might be helpful
Upgrading to Windows 7? Read chart below to see if your Vision Software is supported.
Supported in Windows 7:
• Vision Pro 8 with a production date of October 5,
2009 or newer
• Vision Machine Tools 4.6 and newer
• Vision Windows build 66 and newer with
dongleless password or internal chip.
NOTE: Parallel dongle does not work with
• Vision Pro 7 with updated dongle driver.
NOTE: This worked in testing but if issues are
found, they will be resolved in Vision Pro 8.
Not supported by Vision but may work in
• Vision Windows with parallel dongle. Must be
upgraded to dongleless.
• Vision Pro 6
• Vision Pro 5
• Vision Machine Tools 3.9