| |
| Home Page | Mark Forums Read | Today's Posts | My Replies | Classifieds | Reviews | Photo Gallery | Web Links | Share Files | Advertise With Us | Ad List |
| |||||||
| Product Announcements & Manufacturer News If you are a manufacturer or company with relevant news related to machining or have a new product announcement you may post it here only! (Commercial Posting Forum) |
| | |
| |
 |
| | LinkBack | Thread Tools | Search this Thread | Display Modes |
|
#1
 
11-10-2009, 11:20 AM
| |||
| |||
Lowcost unipolar microstep driver in developing Spec -Maximum motor voltage: 80VDC -Peak current: 6A per phase (4.2A RMS) -Micro step models: Full step, haf step, micro-step 4, 8, 16, 5, 10 -Opto-isolated step/direction -Auto reduce current while motor is stopped -80khz maximum step pulse -frequency -Internal socketed fuse -Single supplier -Microstep to full step morphing at higher speeds protype board  test clip 6A 65V, 10 microstep, 1900RPM max, mach3 control, acc 1000mm per ss Last edited by beliefdrive; 11-10-2009 at 11:50 AM.    |
|
#2
03-18-2010, 11:26 AM
| |||
| |||
| TEST CLIP. Acrylic milling, Control by MACH3, Stepper drive use UM68M Finish  |
|
| Tags |
| microstep, stepper driver, stepper motor, unipolar |
| | |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
| Display Modes | |
| |
Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Using Picstep's PIC to microstep other driver chips. | lucas | PicStep Controllers | 22 | 10-08-2011 11:57 AM |
| Need Help!- Building a microstep driver | izua | General Electronics Discussion | 1 | 05-02-2008 02:41 PM |
| full->microstep driver | visky | PicStep Controllers | 2 | 10-28-2007 11:26 AM |
| The C11G with Microstep Driver 5056 | newla | Machines running Mach Software | 1 | 02-05-2007 09:46 AM |
| My 3d microstep motor driver | smartgsm | Open Source Controller Boards | 5 | 06-01-2006 11:30 AM |
| | |
Linear Mode
