New stepper for Gecko G540

[Kelinginc]

We have a new NEMA23 stepper motor in production for G540 4 axis driver
The Stepper Motor has rated current: 3.5A, Rated Voltage: 3.1V, Resistance:0.9 Ohm, Inductance: 4.1, Rated Torque at 387 oz-in. 1/4" dual shaft
www.kelinginc.net

[lagfish]

Hi,
Any idea when these will be available?

[Crevice Reamer]

Not bad! 2.5 mH would be perfect, as it really needs 65V for best performance. But this motor is a lot closer to perfect in this power range than anything else available, and should work very well.

I like the 4 wire Bipolar parallel internal wiring format.

CR.

[Pinhead]

Keling, whats the release date for these?

[123CNC]

Oops, since I'm here, any updates from Keling on the g540 special motors?

[Kelinginc]

Originally Posted by Kelinginc We have a new NEMA23 stepper motor in production for G540 4 axis driver The Stepper Motor has rated current: 3.5A, Rated Voltage: 3.1V, Resistance:0.9 Ohm, Inductance: 4.1, Rated Torque at 387 oz-in. 1/4" dual shaft www.kelinginc.net

KL23H284-35-4B (1/4” Dual
shaft with a flat) Rated Currant 3.5A, 4mH Inductance, 387 oz-in is in stock now
http://www.kelinginc.net/NEMA23Motor.html

[mountain1]

Any idea when these motors are going to be back in stock??

[Kelinginc]

Hi Sir
It will be back about Feb 10

http://www.kelinginc.net/CNCNEMA23G540Package.html