New Engraving software CNC Write

[cdw3423]

CNC Write is now ready to download. Get your free demo at http://cncwrite.com


CNC Write is a brand new engraving program that is designed to make fast work of common engraving operations. The interface is simple and easy to use. No hunting through cryptic menus for options. If you are familiar with writing your own G-Codes, it is easy to make custom font's and symbols to use in CNC Write. CNC Write was not intended to be used for fancy engraving on signs and plaques, However by designing your own fonts and building a font file, that type of work can be done with CNC Write.

There are two versions, Standard Mill mode and Integrex. The only difference is the Integrex version adds all the features you need for cylindrical interpolation on the Mazak Integrex. Integrexman at integrexmachinist.com can answer your questions about the Integrex modes.

I haven't decided on a price yet but I can say that the highest it will be is 300 for Mill version and 400 for Integrex. It will very likely be less than that though.

The only difference between the demo version and the registered version, is the demo version will randomly replace letters with an 'X'. Once you purchase a registration key, and register the program, that will no longer happen. Please note that the 'X' will often be a different width than the letter it is replacing, this may cause some overlap with that X and the next letter. This is not a problem with the registered version.

If demand is high, many new features will be added in the future. Give the program a try and let me know what you think and what else you would like it to do.

Chris W

[cdw3423]

Some people were having trouble downloading the font files. Clicking on the link would open the file in the browser window. Now it should prompt you to download them instead.

Let me know if you have any trouble getting the program to work.

Chris W

[cdw3423]

The price for CNC Write has been set. The Integrex version is $299.99 and the Mill version is $199.99. Payment can be made via paypal, there is a link on the registration page on the web site CNCWrite.com Registration page

Chris W

[cdw3423]

If you are having trouble figuring out how to use CNC Write, be sure to read the notes below the screen shots on the web site here...

Screen Shots

Also note that you can click on each tab and on the different sections above the tabs to get notes on how to use each group of settings.

Here is a video of CNC Write engraving on mill with a rotary axis.
Video


Here are some examples of what you can do with it as well.






Chris W

[cdw3423]

I have some videos of CNC Write in action on an Integrex and photos of the finished part.

I have also fixed A minor bug in the way the program calculated the start point of engraving when using a rotory axis, and a small bug with the Integrex using G16, when engraving around the part more than one full revolution. If you have already downloaded the program you may want to download it again if you use either of these features.

Integrex Using G12.1 Video



Integrex Using G16 Video



Chris W

[cdw3423]

I have a photo and video of CNC Write on a mill using XAZ for engraving using a rotary axis to engrave on a cylinder.



XAZ Engrave Video 3.6 MB

Chris W

[Mark5615318]

will this work for a Milltronics Controll?

[cdw3423]

The program outputs standard G codes. G00 and G01 is all your machine needs to support for standard engraving. The best thing to do is just download the program and try it out. The only difference between the download and the registered version is the free download will randomly replace letters with an 'X'. If you have problems getting it to do what you need let me know and I can help.

Chris W

[03clipse]

I just found this software looking for a way to do rotory engrave on a Mazak vtc 200 c. I downloaded the trial but can not get good results. I am gettin A moves over 360 degrees. any help

[cdw3423]

Can you post a screen shot of the settings you are using?

Chris W
CNC Write Developer

[03clipse]

Here is the pic. I can do this very simple on my haas but machine time I have to use my Mazak. If I can get it working we can purchase the full version

[03clipse]

I didnt have the inverse time feed checked but tried both ways