SMART Workholding - Really BIG year-end Sale!

[Twistr]

It doesn't get any smarter than this! Eliminate bolts and clamps from workholding - cut your setup times by 92%! Invert-A-Bolt™ Products is running a huge, year-end sale on its patented workholding fasteners. Realize savings of up to 35% off! You won't be able to purchase these fasteners at a lower price than we are offering NOW. Check it out TODAY! Get the fundamental tooling product used in Invert-A-Bolt™ modular fixtures at substantial discounts. These fasteners provide a super stable setup and are preferred for high-speed machining in soft or hard metals. They are also used for quick change pallet and fixture solutions. Why not try them out TODAY? Please note: these prices ONLY available at the link provided on this page. You cannot get to the sale page from the www.invert-a-bolt.com web-site. Sale limited to stock on hand. 1st come, 1st served. Don't delay. It is anticipated the sale will last no longer than 1-2 weeks from 11/30/06.

[Twistr]

Last chance! The really BIG sale ends, Friday, 12/15/06.

[thkoutsidthebox]

So how exactly do these work and hold pieces in place for cnc routing, or are they used for something else?

Thanks.

[Twistr]

Hey Outside the Box Man! These fasteners are used primarily for hog-out type machining, forgings, castings and the like. You see them alot on horizontal, high-speed machines where parts are nested in a single block of material. They are often used in a grid type pattern so that 1 fixture can eliminate many dedicated fixtures. I'm not sure whether they would benefit in the CNC routing application. The body of the fastener is screwed into a fixture plate or similar and then the inner stud is raised up into the workpiece being machined to hold it with minimal obstruction to machining.

[thkoutsidthebox]