new product - Upgrade MDX-15 to Four Axis

[giovanibabiani]

YouTube - Upgrade MDX-15 to Four Axis

[giovanibabiani]

We are going to offer a kit to do the conversion g-code. It is part of our 4th axis conversion. here is a link of it working : Home

[giovanibabiani]

http://www.babiani.com/wpimages/wp431945df_05.jpg
The standard Modela MDX-15 only uses roland language. I mode them, replacing the mother board and add.upgrade to four axis to use mach3 and g-code.
You need to remove the right cover, 4 screws. Unplug and remove the roland board. Then bolt in our board and plug in roland plugs. Then you can use a remote keypad to jog, auto zero, and all the good...

[mufeed]

Originally Posted by giovanibabiani http://www.babiani.com/wpimages/wp431945df_05.jpg The standard Modela MDX-15 only uses roland language. I mode them, replacing the mother board and add.upgrade to four axis to use mach3 and g-code. You need to remove the right cover, 4 screws. Unplug and remove the roland board. Then bolt in our board and plug in roland plugs. Then you can use a remote keypad to jog, auto zero, and all the good...

How much is it cost for MDX 20?

[mactec54]

giovanibabiani

Great job of the machine conversion & ring designs

[giovanibabiani]

Upgrade MDX15 to Four Axis_flip_#3 - YouTube

Upgrade MDX15 to Four Axis_flip_#3 - YouTube

[giovanibabiani]

Upgrade MDX15 to Four Axis_flip _ #4 - YouTube

Upgrade MDX15 to Four Axis_flip _ #4 - YouTube

[mufeed]

This is the best rotary and flip I have ever seen made for MDX 15

hope you make the same for MDX 20

[alans]

It works even better on the 20. you have much more space to work.

The electronics stay the same.

Alan