The laser carving cuts the machine

[hkxy]

THIS is my laser:

Two kind of outlooks, aluminum and plate work

Working travel(Millimeter):1200*800,900*600
Max speed(m/min):15-20
laser power(w):60w co2
Driving system:windowsXP-98

[hkxy]

Is suitable the profession:
The handicraft, the bamboo, the lumber, the advertisement design, the
family design, the clothing, the leather, printing make lithograph
plates, the decoration, the display, the model.
Is suitable the material:
Cotton material, leather, rubber, bamboo strip, PMMA plexiglass,
chinaware, soft stone, spline, cardboard, plastic, anodic oxidation
aluminum and so on nonmetallic material

[hkxy]

I want to sell these lasers the machine in here, if you cut to the
actual carving the size is the 1200*800 millimeter laser machine has
the interest,

Possibly is the end product machine, or components set
Including: The WINXP-98 laser software, the DSP-32M-2.0 control
card, the condition screen, according to the insertion discs,
step-by-steps the electrical machinery and the power source, the
leather belt, the leather belt wheel, the industry standard track, the
limit switch, the 60-100W laser, the power source which the laser may
adjust, 3 reflections lens, special-purpose focusing lens, the lens,
the lens support, the lens adjusting screw, the red light generator
and only is the system, the air pump, the cooling water pump, removes
the mist and dust the air pump

Prepares the material which elects is: Honeycomb board, vacuum
platform, carbon fiber plane, fluctuation plane, senior lens, US'S
laser generator, carbon fiber mouthpiece, protection security
eyeglasses.

Please tell me you to have the interest the price?

[CNCadmin]

I'd like to know, also what the shipping would be. Do you have anymore pics and power requirements?

[miljnor]

There is always an interest, just, the price usually makes or breaks that interest.


So lets hear it.

[hkxy]

hi CNCadmin:

The means of transportation is:
The components set may the air movement, the example: DHL. Entire
machine: Marine transportation.
The transport expense have the buyer burden. (Few increase price),
Or for the transport company which assigns in here takes the
cargo by the buyer payment money, then gives you. (This is does not
need to pay for mine transport expense, only must pay cargo money)

Laser power:
Has very many models the choice: 4W, 6W, 8W. 12W. 15W, 18W, 20W, 23W,
30W, 40W, 50W, 60W, 70W, 80W, 100W, their length 200 millimeters -1500
millimeter. And has the correlation the power source.
Even 150-300W (metal pipe in US, may own purchase, is high in Chinese
purchase price)
Moreover the laser power may defer to your wish in the software
to be possible 0%-100% does not have the stage the adjustment.
Certainly we retained the ampere meter resistance adjustment, although
this method already fell behind.



hi miljnor :

How many US dollars do you think appropriately in this machine? The
reference opinion gives me, thanks

[miljnor]

I realy have NO experience in pricing Lasers, so me giving you a price to meet is probably not a good Idea.

If anyone else on this forum wants to take a shot at it, be my guest.

Paul, since you made yours why don't you take a gander at it.

To make it sell to the DIY crowed since you can buy and assemble one(50W I believe) for around 3000.00 dollars US I wouldn't think more than 1500.00 to 2k more is going to get many sold. And even that would probably kill alot of the DIY crowd.

But on a side note: Since your from china I am thinking the freight/shipping with customs is going to be a deal breaker, but again I have NO experience with overseas purchases.

[CNCadmin]

Originally Posted by miljnor I realy have NO experience in pricing Lasers, so me giving you a price to meet is probably not a good Idea. If anyone else on this forum wants to take a shot at it, be my guest. Paul, since you made yours why don't you take a gander at it. To make it sell to the DIY crowed since you can buy and assemble one for around 3000.00 dollars US I wouldn't think more than 1500.00 to 2k more is going to get many sold. And even that would probably kill alot of the DIY crowd. But on a side note: Since your from china I am thinking the freight/shipping with customs is going to be a deal breaker, but again I have NO experience with overseas purchases.

I've considered it But what is a turn off is that people want turn-key, they don't want to deal with laser tubes, power supply and optics and neither do I. Their was and is so much involved in producing a cnc laser and tho it's not imposable to do a kit, it just may be a PITA dealing with questions and people having no idea the complexity or danger involved.

[miljnor]

I've considered it But what is a turn off is that people want turn-key, they don't want to deal with laser tubes, power supply and optics and neither do I. Their was and is so much involved in producing a cnc laser and tho it's not imposable to do a kit, it just may be a PITA dealing with questions and people having no idea the complexity or danger involved.

I agree. I think that mybe if hkxy wants to do a kit he will have to get a distibutor here to put it together anyway as His english would need alot of work.

My previous post was for an assemble unit for a disassembled unit they aren't going to get as much money do to the PITA factor that you mentioned. Although truthfully if he had a 100w kit ready to go I would probably buy one but am UNWILLING to deal with any kind of customs or importing Hassles.

[hkxy]

Manager: I in here issued my DIY the price, is not for the
advertisement, is for obtain more suggestions, do not have to delete
this writing, thanks

I have prepared the different machine for the amateur, the
different components combination, the components and the price
increase gradually, my here has prepared 5 kind of different uses
machines for the friend. The goal is the different need.
These components have come from China, South Korea, Germany and
Canada. In American and Europe's price should compared to in China
cheap, because the market competition are many.
Is used for in Chinese these products in each factory application, has
the strict manufacture standard, friend of mine in the model airplane,
the sailing ship, the artware, symbolized, POP, the school, the
museum, the clothing, the leather (my gate does not sell for primary
leather factory). . . Has the good application.
I am engaged in this mechanical work for 5 years, my very much time in
this work, other time in wish environmental protection propaganda and
RC MODEL hobby.

Under is I pondered after the price and the components characteristic
(more characteristics in above), I do not lower the price the
malignant competition, I need seek the product in US and Europe the
proxy, with friend which more likes the laser:

A, the work which provides for the amateur
1,Amateur 1 model:
Screw fixed support, round straight line track, ordinary PVC plate,
with carbon fiber board, with other components sets
Suits amateur's DIY, the key function is cuts
Price: 8,000 US dollars (friend which orders in the future 30
days have very big preferential benefit, so long as 5,600 US dollars,
cut-off time is in front of 2005.9.30)

2, amateur 2 models:
Stainless steel support, honeycomb plate, round straight line track,
other components sets
The key function is cuts with the high efficiency cuts
thoroughly, with not fine pattern
Price: 10,000 US dollars (friend which orders in the future 30
days have very big preferential benefit, so long as 7,000 US dollars,
cut-off time is in front of 2005.9.30)

3, amateur 3 models:
High strength aluminum support, aluminum plane, vacuum plane, high
accuracy track, other same
May cut also may carve. The actual situation, this machine is
the Chinese factory use, but is not the amateur
Price: 12,000 US dollars (friend which orders in the future 30
days have very big preferential benefit, so long as 8,400 US dollars,
cut-off time is in front of 2005.9.30)

B, but prepares for the factory:
1, factory 1 model
High strength aluminum support, high strength aluminum plane,
vacuum plane, high accuracy track, other same
The speed quick superiority, reduces very many costs compared
to other factories, the increase profit in this machine, my friend
with this in China's best machine, obtained several automotive
factories interior to enjoy the competition which the material the
contract succeeded.
Price: 13,000 US dollars
2, factory 2 models
Optimized combination.
Price 15,000 US dollars


I am consulting to each harbor and the airport cartage expense, I
considered bears some cartage expenses for the buyer.
Even for first 5 the friend which purchases the machine in here, free
bestows 60W CO2 the glass laser.

My English is not the good degree, I hoped exchanges with the friend,
now is the translation language, cannot entirely accurate expresses my
thought in here, if you cannot understand my thought, please inquire
me and my translation software


You thought this price has the competitive power strength in
US and Europe?
Thanks

[Mcgyver]

Paul, is there is policy for this type of post??? sounds very commercial - the start of the thread is an advertisement. I am I only one that thinks this is over the top?

hkxy, why don't you post your plans and drawings, this place is all about goodwill and sharing, between friends, correct?

imo it’s over top, especially from a country with predatory trade practices, human and environmental abuses, and a state sponsored undervalued currency, all of which as hollowed out NA's manufacturing base through structuring an uneven playing field.

Sorry to get political but shouldn't there at least be a separate commercial area for this, um, stuff? I suppose I shouldn't care and there's nothing I can do about it if people want to voluntarily continue the unidirectional knowledge transfer for free, but it does seem abusive to the goodwill of this place.

[miljnor]

me too now. didn't get me at first but now I think your right Mcgyver!