New - VCarve Wizard Software

[Tony Mac]

Hi Jay,

I've put together a brief video that shows how to manually offset a design to compensate for the cutter radius when doing inlay work.

http://www.vectric.com/vectric/image...ual_Inlays.avi

(This is a 3Mb file and may take a few moments to download)

The video shows and explains, step by step how what's required to offset the geometry and then how to calculate toolpaths for the 'female' pocket and the 'male' insert.

Hope this helps,

Tony Mac

[Bob Hutchinson]

Tony, Thank you again....I will check vector art......im a little confused about how to do the boundary but i will work on it......

Bob
Grizzmo

[Bob Hutchinson]

Hi Tony,
Im realling liking this software....more than worth the cost.....Love it.....
Where do I find the Create Sharp Corners option and how do i use it....cant seem to find it.....
should have some more photos in a couple of days

Thanks Grizzmo

[Tony Mac]

Hi Bob,

The option to create sharp corners is on the Offset Vectors form as shown in the attached image.

Tony Mac

[dighsx]

Tony that video was great. It really cleared things up for me, thanks a ton!

[Tony Mac]

Hi Jay,

Thanks for the feedback.

It really does make life a whole lot easier when you can watch and listen to a video explanation, I should of thought of it sooner.

I hope we will wee more of your work and machine.

Regards,
Tony Mac

[zoltan]

Hi Tony,

I would like to buy your software but my budget is.....so, I would like to ask you if do you have any financial schema? I think I would be able to pay it in 4 installments. Is there any chance for something like this?

Thank you,

Zoltan

PS: From where I can buy the mask spray Bob used?

[Bob Hutchinson]

thanks tony, I found it when I watched the video.....DUH....gettin old i guess...
Grizzmo

[dighsx]

Well I took the plunge and bought a copy of Vcarve today. Here's a shot of my first non-demo test. I think it came out pretty good considering it's oak and the bit I was using is pretty dull. But it was super easy to create in Vcarve. As I do more tests I’ll post the results.

[Tony Mac]

Hi Jay,

Fantastic job!

It's great to see what customers can achieve with the software and thanks for the positive words.

We try to deliver what we say the software will do, no over-selling and I hope this is what you have found.

Tony Mac

[Bob Hutchinson]

Tony, Here are some more i may have posted some of them before they were painted...these are all finished. not perfect but im happy as a clam...ill get better with the design as i get used to what the machine does to eac drawing....

[Jason Marsha]

Jay,
Keep the pics coming that logo came out great.

Bob
They look really good Bob and the Hutchinson sign looks best of all. I guess that's the same font as the Bullshead Sign.

Who is that hiding behind the sign.

Jason