What do you do when your tool broken?

[diylife.com.tw]

What do you do when your drill or end mill which are broken?

In Taiwan, we are a very thrifty country. If our drill or end mill which ware broken and they were new, we would think to re-start fresh it. It is why we want to have the grinder machine like HG-01 & HG-03.

We can use the grinder mahcine to re-fixed our drill & end mill, only take 30 seconds. It will be new tool which we can use again.

It is not only save our money and time, but also we are thinking our green.

How do you think about that?

If you would like to know more information about our grinder machine, please go to our website: www.atron.com.tw.

We are very welcome to introudce it for your reference.

Best regards,
J.S.
www.atron.com.tw
E-Mail : mill@diylife.com.tw
Skype: yaams0939

[diylife.com.tw]

While you broken your end mill with your mill machine.
Please do not worry it.

You can take look at our grinder machine and sharp your end mill in 30 secends.
Just view our video: http://www.atron.com.tw/uwish/front/...ategory=109681

You would know why you need the grinder machine with your mill...

Sincerely,
J.S.
www.atron.com.tw
E-mail: mill@diylife.com.tw
Skype: yaams0939

[Khalid]

What do you do when your tool broken?
yesterday i melt my Drill on SS316... It was the second hole and i have to go 239...
I did following things:

1- I have collided my head the wall infront of me... i don't know how many times
2- I removed the bit from the holder.. and have 1 minute silence for the deceased drill.
3- I then put the drill in the scrap grave
4- Install the new drill and remember that
a) I have to minimise the RPM from 1250 to 500 for 8mm HSS drill
b) Minimise the feed

Any thought?