Low cost 3D printing

[motordude]

Hello all!
Please have a look at enclosed pics. Models are printed on a ThermoJet 3D printer, material wax. My company will be offering this service as from January 2008. To keep cost down, the models will be delivered unfinished which means that the supports are still there. We currently have 3 of these printers.

Max. model size is: 250x190x200 XYZ. If your models are larger, split them up in smaller sections and glue them together with superglue.

Model prices will be:
Start up charge each order: 25 EURO (approx. 37USD)
Pr. litre (61.02 Cu.in) of material: 200 EURO (approx. 295USD)=4.83USD/Cu.In

Postage charge example:
Norway-USA: 1kg (2.2lbs)= 70 EURO (approx. 102USD)
10kg(22lbs= 120EURO (approx. 176USD)
30kg(66lbs= 250EURO (approx. 368USD)

Best regards
John Tangerås

Tangerås Verksted & Støperi
Volaheiane
5636 Varaldsøy
Norway

tel+47 56579977
cell +47 91755084

email: lostwax(at)online.no

[Khalid]

gr8

[LenMcC]

looks like some awesome equipment.

[neilw20]

Nicely trimmed nails, or were the chewed? (LOL)
Export to Waxworks!