Newbie Roland Modela MDX-3/Picza PIX-3

Page 1 of 2 12 LastLast
Results 1 to 20 of 23

Thread: Roland Modela MDX-3/Picza PIX-3

  1. #1
    Registered
    Join Date
    Apr 2008
    Location
    japan
    Posts
    2
    Downloads
    0
    Uploads
    0

    Red face Roland Modela MDX-3/Picza PIX-3

    If any body could help me, I have just acquired stewardship of a Modela MDX-3 and Picza PIX-3 Tandem of machines. I have not been able to find the original drivers, all the updates seem to be out there but not the original Dr Picza bundle that came with the machines which leaves me all revved up and no place to go. These machines have never been used , so if any body could help me it would be greatly appreciated ,

    Similar Threads:


  2. #2
    Registered theboneman's Avatar
    Join Date
    May 2008
    Location
    USA
    Posts
    9
    Downloads
    0
    Uploads
    0

    Default Modela Pixza 3

    I have the complete bundled software. Do you have an FTP site I could upload it to?
    -Sal



  3. #3
    Registered
    Join Date
    Jun 2007
    Location
    usa
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default

    "I have the complete bundled software. Do you have an FTP site I could upload it to?"

    Hi Sal
    Is that offer still open ,My website may be able to have ftp upload.
    I would love to have that bundle as I lost my disc about 6 years ago and the only piece of the bundle that works without install and just copy to new computer is the modela player. It would be great to try out the engrave and design.

    thanks
    Arthur



  4. #4
    Registered theboneman's Avatar
    Join Date
    May 2008
    Location
    USA
    Posts
    9
    Downloads
    0
    Uploads
    0

    Default PIX-3 Bundled Software

    Arthur,
    Sure, no problem. Contact me privately with your ftp and I'll send the entire bundle.
    Sal



  5. #5
    Registered
    Join Date
    Jul 2008
    Location
    usa
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default

    Sal,

    I am in a similar position, I have moved recently and have lost my disc. I don't have an ftp site, but do you think you could upload it to megaupload or rapidshare, or any other file sharing website you may use?

    Thanks

    Joe



  6. #6
    Registered
    Join Date
    Sep 2008
    Location
    USA
    Posts
    2
    Downloads
    0
    Uploads
    0

    Default

    I also would like this bundle as I just found one of these machines in a storage locker without any of the software. However I do not have an FTP account. Is there anyway that someone can help me out with getting this software?

    Thanks
    -Glenn



  7. #7
    Registered
    Join Date
    Sep 2008
    Location
    USA
    Posts
    2
    Downloads
    0
    Uploads
    0

    Default

    please.



  8. #8
    Registered
    Join Date
    Sep 2008
    Location
    Mexico
    Posts
    3
    Downloads
    0
    Uploads
    0

    Default

    Hi Sal, sorry to bother u Im in the same position, lost my cd and had to reinstall windows and now i cant use my pix-3 and really need it for everyday work... You really will save me if u can upload the bundle, I have a You sendit drop box http://dropbox.yousendit.com/HECTORFAUSTO1264962 Once I have it I can upload it to rapidshare for everyone else here.
    I would really appreciated.

    -Fausto



  9. #9
    Registered theboneman's Avatar
    Join Date
    May 2008
    Location
    USA
    Posts
    9
    Downloads
    0
    Uploads
    0

    Default Picza and Modela Software Bundle Sent

    Fausto,

    I have sent you everything anyone could every need for any one of the Roland PIX or MDX series machines. I've included all the manuals and a tutorial movie as well. Install from the CD menu first before installing updates. The latest version updates may not work properly with the older version MDX machines so check them out carefully and make sure all functions work. (Check for this glitch: See if you can add a new toolbit size, if you can't roll-back to the next earlier update.) Aside from that MDX update issue, all the PIX updates and evrything else works great. I sent it in a RAR file. (47MB) Let me know if you got it. It's has been checked for viruses as well. Good luck.

    Regards,
    Sal



  10. #10
    Registered
    Join Date
    Sep 2008
    Location
    Mexico
    Posts
    3
    Downloads
    0
    Uploads
    0

    Default PiczaModella Files

    Ok here's the file for everyone who needs it. All thanks to Sal.

    http://rapidshare.com/files/147609373/PiczaModella.rar

    Thanks again, Greetings,

    Fausto



  11. #11
    Registered
    Join Date
    Mar 2011
    Location
    UK
    Posts
    6
    Downloads
    0
    Uploads
    0

    Default

    Hi everyone,

    I have just acquired an MDX-3 without the software and the links below don't seem to work any more.

    Can anyone help - I have an FTP site if that helps.

    Roland have lots of stuff on their site but I can't find the bundled software. I don't want to spend money on better software until I am sure it works.

    Any help gratefully received!!

    TIA
    David



  12. #12
    Registered
    Join Date
    Sep 2008
    Location
    Mexico
    Posts
    3
    Downloads
    0
    Uploads
    0

    Default

    Hi Graeme G, heres the new link, hope it can help u.

    Hotfile.com: One click file hosting: PiczaModella.rar



  13. #13
    Registered
    Join Date
    Mar 2011
    Location
    UK
    Posts
    6
    Downloads
    0
    Uploads
    0

    Default Big thankyou!!

    Hi Fausto,

    Thanks very much for posting the files again, I downloaded them and tried them on my desktop (Vista) software ran but driver would not load, I downloaded an XP driver from the Roland site and whilst this loaded it wouldn't talk to the engraver, so I tried it on my W98 laptop and everything worked perfectly first time - brilliant.

    Thanks again.

    David



  14. #14
    Registered
    Join Date
    Dec 2013
    Posts
    2
    Downloads
    0
    Uploads
    0

    Default

    Hey guys,

    I just got a PIX-30 digitizer and I am unable to locate the software online.
    Does any of you still have the files? FTP upload or any other way would be highly appreciated.

    Thanx



  15. #15
    Registered
    Join Date
    Mar 2011
    Location
    UK
    Posts
    6
    Downloads
    0
    Uploads
    0

    Default

    I still have all the stuff Fausto sent me and some other stuff I found although I did not have the digitiser so I don't know if that software is included. I can put this on my FTP site if you want, it's 183MB total. Please PM me and I'll send you the details.
    David

    Last edited by davethesteam; 12-06-2013 at 04:04 PM.


  16. #16
    Registered
    Join Date
    Dec 2013
    Posts
    2
    Downloads
    0
    Uploads
    0

    Default

    Great! the digitizer (PIX-30) is up and running.

    Thanx



  17. #17

    Default Re: Roland Modela MDX-3/Picza PIX-3

    Hi guys (n Gals)
    I amalsolooking for Dr Picza PIX 3 software

    rapidshare?/



  18. #18
    Registered
    Join Date
    Dec 2016
    Location
    Lebanon
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default Re: Roland Modela MDX-3/Picza PIX-3

    Dears can anyone uplaod the MODELA MDX-3 softwares again? i just aquired one and it didn't have any software cd. thanks



  19. #19
    Registered
    Join Date
    Mar 2011
    Location
    UK
    Posts
    6
    Downloads
    0
    Uploads
    0

    Default Re: Roland Modela MDX-3/Picza PIX-3

    Quote Originally Posted by dish0n0red View Post
    Dears can anyone uplaod the MODELA MDX-3 softwares again? i just aquired one and it didn't have any software cd. thanks
    Here is a DropBox link. Let me know if you have any problems.

    https://www.dropbox.com/sh/yitwxwngi...OjU4BpjFa?dl=0

    Regards
    David



  20. #20
    Registered
    Join Date
    Jan 2017
    Location
    United Kingdom
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default Re: Roland Modela MDX-3/Picza PIX-3

    I've acquired an MDX-3 and have "bodged" together a powersupply for it and have managed to get it connected up, but I cannot get Vpanel etc. to see it.
    I need the drivers, however Roland have obviously discontinued support for this model now, so there aren't any available for Windows 10. Does anyone know of any updated drivers, a driver for another machine that will do the same job, or any other way to get it to work?

    I'm still fairly new to all this so forgive my "newbie" attitude.
    Any help will be greatly appreciated.

    Many thanks
    -Zack



Page 1 of 2 12 LastLast

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Roland Modela MDX-3/Picza PIX-3

Roland Modela MDX-3/Picza PIX-3