- Leadshine 4660 over current protection
-
Registered
Leadshine 4660 over current protection
I got lights after a bit of setup on my Leadshine. Was working then on an estop hit it has lights. 1 flash for over current on the 1st driver. the rest are flashing 3 for estop. everything is reset and have reboot but lights are still flashing. anyone know how to reset it? I've cycled power, unplugged and drained everything, rebooted.
Similar Threads:
-
- Leadshine 4660 over current protection
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules