Need Help! Plasma torch On OFF automatic solution and voltage


Results 1 to 2 of 2

Thread: Plasma torch On OFF automatic solution and voltage

  1. #1
    Registered
    Join Date
    Jan 2017
    Location
    United Kingdom
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default Plasma torch On OFF automatic solution and voltage

    Hi Everybody! I have build up CNC plasma , its done , but now is one problem . I have R-Tech I-Cut100 plasma , HF with pilot arc 100A max. Now I need switch torch ON/OFF automatically. No problem in software level , but problem hop wire/connect torch trigger wires with controller board. What the best way ? I tray connect to my controller board DC/DC relay DC-3-35V /DC 5-110V in 5-110V connect that wire which originally connects with trigger (no relay dead -too much volts I think because HF - maybe I'm not wright). Now is question how get solution for this problem ? Relay? contactor ? solenoid ( not very happy with this solution). Someone know how Volts come in this trigger wire ? (this note same wire who come to plasma electrode) . I very hope to Yours help.

    Similar Threads:


  2. #2
    Member
    Join Date
    Mar 2016
    Location
    Poland
    Posts
    322
    Downloads
    0
    Uploads
    0

    Default Re: Plasma torch On OFF automatic solution and voltage

    There should not be a high voltage in the trigger (max 24V) unless You connected wrong wires. The trigger is simple button with the cheapest momentary switch inside.



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Plasma  torch On OFF automatic solution and voltage

Plasma  torch On OFF automatic solution and voltage